|
|
 |
GRT-S Series Hydraulic Swing Arm Cutting Machine |
|
|
|
 |
| USE AND CHARACTERISTICS: |
1. The machine is applicable to cutting of various nonmetal materials by cutting die.
2. The oil way system specially designed can conveniently adjust the rocker height.
No adjustment is needed after the height of cutting die is changed.
3. High speed and low energy consumption. With only power of 0.75KW, it can output the cutting force of 20T.
4. To meet the need of frequent replacement of cutting die of different sizes, another type of machine that can timely output three kinds of cutting force is available for selection.
5. Ductile cast iron body made the machine be used for a very long time and small noise.
|
| Main technical data: |
Model |
GRT-S22 |
GRT-S27 |
GRT-S27K |
GRT-S27L |
Maximum cutting force |
22T |
27T |
27T |
27T |
Table area |
900×430mm |
1000×500mm |
1000×500mm |
1000×500mm |
Swing arm width |
370mm |
370mm |
500mm |
610mm |
Cutting stroke |
90mm |
90mm |
90mm |
90mm |
Motor power |
1.1KW |
1.5KW |
1.5KW |
1.5KW |
Electric Supply Voltage |
3x440/415/400/380/220/200V, 50/60 Hz |
Single phase 240V/220V, 50/60 Hz |
Packing size |
1050×1000×1500mm |
1150×1200×1500mm |
1150×1200×1500mm |
1150×1200×1500mm |
N.W(with oil) |
670kg |
900Kg |
1000kg |
1050kg |
G.W |
700kg |
950Kg |
1050kg |
1100kg |
|
REMARK:The machine will iclude cutting board,hydraulic oil,tools and spare parts. |
| [ BACK ] |
|
